Accessories

PROJECTOR ARM B-24
This bracket is adaptable to the majority of the projectors. The spider given with the equipment is adjustable to several projector models and it offers a safe ceiling anchoring system without spoiling the projector’s design.

T-MEDIUM and T-LONG brackets
These two models of bracket are very versatile and easy to install. They are adjustable for virtually every LCD and DLP projector thanks to the universal spider system with which they are equipped. Two measures are available: the T-MEDIUM bracket reaches a total height of 86 cm. and the T-LONG bracket reaches a total height of 125,40 cm

PROJECTOR ARM B-7 
The PROJECTOR ARM B-7 is the basic model of the projector bracket, suitable to almost all the video-projectors. It is supplied with the minimum extension of 6 cm. It is painted with grey epoxy powder (RAL 9006) and can support projectors up to a maximum weight of 15 kg.

The floorstands are the right article to assure a fast and safe mounting of flat screens when it is not possible or not needed to fix the frame to the wall. Floorstands height from 135 cm. to 240 cm.

Soft Bag is very useful to carry your frame screen during short trips. Soft Bag is waterproof, impact resistant and provided with a shoulder strap and a head handle for a safe and easy handling.

The 12 Volt interface switch is a switcher based on a relay that drives the opening and the rising up of a motorized screen, depending if there is or not a continuous 12 Volt DC power. It can be used with video-projectors, amplifiers or Home Theatre decoders that have an output of 12 Volt DC.

The projector lift SI-100 is a universal bracket suitable to fix the projector inside a false ceiling. It can be adjusted with a panel, if you need it to be foldaway. It is equipped with an on/off switch unit and the maximum descent is 90 cm.

The projector lift SI-200 is a versatile and innovative product that enables the installation of the projectors in environments where particular aesthetical solutions are needed. The SI-200 is supplied with an extremely SILENT Somfy® motor that allows a descent from a minimum of 20 cm. to a maximum of 190 cm.

This is a very versatile innovation, very useful to mask inside false ceilings every kind of electric screen within 160 cm. and 450 cm. of width. It is entirely made of aluminium painted with white epoxy powders (RAL 9010), the same colour of the screen’s housing.